GO-NOGO tolerance gauge for SLA resin-testing.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a resin test for SLA printers. Please print at 50 microns and note your exposure time, and room temp. Process…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 195
- Wydruki
- 0
- Wyświetlenia
- 1011
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This is a resin test for SLA printers. Please print at 50 microns and note your exposure time, and room temp. Process and cure. If your software has a "horizontal size compensation" feature, please make sure to disable it.
*Please print flat on the tray with no support* the edges are chamfered so that bottom-layer expansion doesn't matter.
Each resin prints a different size, so we need a public database of results so that manufacturers will see that they need to add a "horizontal size compensation" setting into their slicers. Here are the results:
https://docs.google.com/spreadsheets/d/1yDwszgncTyOxvyJho6y1kxLJquH2GsfL83KaFXT6068
Post your results here so that everyone can see results for every brand of resin:
https://goo.gl/forms/cNGHU48hw34LbB2a2
Category: 3D Printing Tests