OpenAPS Edison/Explorer Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for a common smaller OpenAPS implementation. NOTE: This may not fit the very new 1.3 version of the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a case for a common smaller OpenAPS implementation.
NOTE: This may not fit the very new 1.3 version of the Explorer board that is shipping in July/August because they made the board 0.85mm thicker.
Dimensions: 65x51x21mm for 2500 mAh version, and 65x40x21mm for 2000 mAh version.
The enclosures expect the Explorer and Edison to use 3.0mm spacers.
The hole on the top is for a lanyard loop.
For more info, see the docs at:
openaps.readthedocs.io
Video: https://www.youtube.com/watch?v=vHNwDIy1z-A
Battery 2500: https://www.amazon.com/Adafruit-328-Battery-Lithium-Polymer/dp/B01NAX9XYG
Battery 2000: https://www.amazon.com/gp/product/B0137ITW46
Edison: https://www.amazon.com/gp/product/B00PTVSS4A/ref=as_li_tl?ie=UTF8&tag=httpwww300blk-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00PTVSS4A&linkId=c2b3a172cdc64bd2f74bc41dae8b7860
Explorer: https://enhanced-radio-devices.myshopify.com/products/900mhz-explorer-block-pre-order
I suggest printing at 0.1mm layer heights because the locking grooves are so small. To make it easier, I print the first layer double thickness.
Category: Gadgets