Parametric dovetail organizer: boxes, bins, drawers. all vase mode prints.

Major update 2019-June-28 - See notes below...

---

A fully parametric (customizable) organizer. Create a single box or bin

or a drawer. Combine them to make a scalable organizer.

All printed in vase mode .4 nozzle using a .6 width. These are very

sturdy unless you go really big.

I've included a simple snap fit drawer pull. I used a heated rod to make a

hole to install the drawer pull. Glue should not be necessary.

Let me know if you have any problem printing/fitting the samples.

---

Installation:

unzip obiscad.zip to an /obiscad folder in same folder as dovetailbox.scad

---

Usage Notes:

Boxes, bins and drawers are made based on a reference cube which has dovetails

added and subtracted on the X and Y axis.

entering

[X,Y,Z]=[40,50,70]

will give you 40x50x70 box with dovetails attached to 2 sided and dovetails

subtracted from 2 sides for final dimensions:

[40+dovetail, 50+dovetail, 70 ]

Drawers will be correspondingly smaller in the opposite direction since they

need to fit inside the box which has had inner dovetails subtracted. Then

there is the added difference of the drawer gap which makes the drawer

smaller still for an easy fit.

---

2019-June-28

I moved all of the beveling to the obiscad beveling library https://www.thingiverse.com/thing:30336

Most of the bevels scale cleanly now with changes to the box dimensions... The

left and right beveling on the bin angled cuts still need to be tweaked a

little when you resize the bin. This process is much easier now. Enable

debugBinBevels and change the bevel correction parameters.

If anyone manages to anchor the angled cut bevels:

openingLeft / openingRight / bottomLeft / bottomRight in module doveBin()

to the cut edges correctly please let me know how and I'll update the source.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: PLA

Notes:

Category: Containers