90 mm Cubicle Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our cubicle walls are a 90mm wide. I made the hook wider and it reaches further down on the opposing side.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Our cubicle walls are a 90mm wide. I made the hook wider and it reaches further down on the opposing side. I printed it at 50% infill in PETG, which turned out to make this over-engineered once we hung the actual monitor. Could have gotten away with less infill, but I didn't want to risk it.
Print instructions
Category: Computer Print Settings
Printer Brand: Prusa
Printer: i3 MK2 MMU
Rafts: No
Supports: No
Resolution: 0.35
Infill: 50%
Notes:
Might be able to get away with less infill depending on the size of your monitor. Use at your own risk. I printed at 50% with the intent of not printing this again.