1 / 4
Sovol SV01 Extruder Wire Harness Strain Relief
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently replaced my hotend with an E3D V6 all metal hotend. I had to rewire quite a bit and when I was done I…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 436
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
I recently replaced my hotend with an E3D V6 all metal hotend. I had to rewire quite a bit and when I was done I wanted a better way to provide strain relief to the wire bundle.
Print Settings
Printer:
Sovol SV01
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
100%
Filament:
GST 3D PLA +
Dark Blue
Notes:
Print at 3 perimeters and 100% infill for strength
Category: 3D Printer Parts
