Sentrysafe CB-12 Cashbox tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cash try for Sentrysafe CB-12 cash box. Hold 4 bills
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This particular cash box comes with a tray that only holds 2 sets of bills and has a bunch of useless pockets. Rather than buy a different cash box, I designed this. The bills will fit snuggly in place, there just simply wasn't enough space for larger pockets. It works though, as it will hold the bills in place. So it was accidentally on purpose.
Each half will BARELY fit on a Ender 3 bed. Each half took 9.5hrs at 0.28 layer height and around 160-170gr of filament each
When printing, watch your supports on the bottom overhang on the left half. If they are not right you will end up needing to cut away material to get the halves to line up correctly.
If you wish to remix the model, for fitment the total width needs to stay the same. The bill pocket area can get made slightly wider as to add more outer wall thickness.
V2 files have the outer walls thickened up a little bit