1 / 3
Splash Guard for House of Hydro Mister
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a splash guard specifically designed to be used with the 1 disc ultrasonic mister from the House of Hydro.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This splash fits between the float and the mister of the 1-disc version from the House of Hydro to prevent water from splashing everywhere.
It needs to be printed upside down with supports. I used PLA, but some of them are beginning to expand and bend, so next time I will try PETG.