Workshop Organizer: Pegboard Glue Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray that fits into an 1" pegboard made for holding 2 bottles of Gorilla glue and 2 bottles of Elmer's glue.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
This is a glue holding tray I designed to fit into a 1 inch pegboard for my workshop, the first in my series of workshop organizers (see my collections). It holds two bottles of Gorilla glue (or bottles of close size) and two bottles of Elmer's glue (or bottles of close size). In my workshop, it holds a bottle of Elmer's school glue, two bottles of Gorilla glue, and a bottle of Titebond II.
Assembly Instructions
As this file prints with no supports, there are five pieces that you need to print: one “Main Piece Glue Tray," two “Glue Tray Pin End” and two “Glue Tray Pin Body.” Once the pieces are printed, assembly is very straight forward: the two pins go into the two holes on top of the main piece, and the pin ends plug on to the ends of the pins once the pins are though the main piece. Supergluing is very, very strongly recommended, unless you want to run the risk of having your glue fall off your pegboard.
After that, wait for the glue to dry, and you should be ready to attach it to your pegboard!
Please comment if there are any problems with this file as I've never designed something for a pegboard before. Also note that if there are any problems with my files please comment and I will fix them as soon as I can.
Commercial and Support
If you would like to sell this file, digitally or physically, please message me.
If you would like to support me, please like and download. Thanks!