Nesting Playing Card Holders or Box sized for Bicycle Brand Sized Cards, Fits 1 Full Deck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two halves of a deck box that fits one Bicycle Brand deck of playing cards, 63 mm by 88 mm cards.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 282
- Wydruki
- 1
- Wyświetlenia
- 1517
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a couple decks of playing cards that the original box got ripped and so I thought I would print a box. Then I thought it would be sort of nice to have a box that can act as a draw and discard holder. This is the rev. 0 version of that idea.
The holes are there simply to reduce print time. The side cut-outs are there to make getting the cards out easier. Truth be told, it's probably a lot easier to not use the box as a draw and discard container, unless you need things nice and neat (you know who you are).
I suggest using the larger half as the draw side - it's a lot easier to get cards out.
NOTES:
- There is no “locking” feature to keep the box closed (maybe in later revisions). Use a rubber band or two to keep it closed.
- There is no feature to snap the two sides together when open
- The corners are way too “sharp” IMO. Future revisions might add a round over or chamfer