Bike water bottle cage/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a bottle holder specifically for a 20 oz. insulated Klean Kanteen.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 172
- Wydruki
- 1
- Wyświetlenia
- 1275
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I've had Klean Kanteen water bottles for years, but most of the commercially produced cages/holders haven't fit well. So, that's why I made this one.
It will work with either of the below linked bottles.
https://www.kleankanteen.com/collections/water-bottles/products/classic-water-bottle-27oz
https://www.kleankanteen.com/collections/insulated-bottles/products/insulated-water-bottle-20oz
I hope you like it and please post a make if you print one.
Print instrutions
I printed this in ASA with a .4 nozzle, .2 mm layer height, 4 perimeters and 6 bottom/5 top solid layers. No supports are needed.
It could be printed in PETG also, but I wanted the UV resistance of ASA.