1 / 3
Clipper Blades Holder ( Pet Grooming, Barbers, Stylists, Cosplay)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10 slot blade holder for Andis clippers. For Pet Groomers, Barbers, Stylists, Cosplayers and Crafters.
- Ocena
- 0 / 5
- Polubienia
- 118
- Pobrania
- 1085
- Wydruki
- 0
- Wyświetlenia
- 4329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (146)Powiązane
10 slot blade holder for Andis clippers. For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters.
Slots are sized to fit blades similar to sizes 000 or 3 1/2
(T blades will fit, but will knock into other blades. See pictures.)
There is also a matching lid for this holder: https://www.printables.com/model/213800-lid-for-clipper-blades-holder-pet-grooming-barbers
Slots sizes are:
- 0.75 width
- 2 in length
- 1 in depth
Printing Tips
2 gcodes are included sliced from Prusa Slicer:
- Layer height 0.3mm set to preset 0.3mm DRAFT
- This takes about 3 hours to print
- Layer height 0.2mm set to preset 0.20mm SPEED.
- This takes about 4 hours to print.
- 15-20 minutes can be shaved off the printing time if sliced at the same preset in addition to using the Variable Layer Height Feature.