SKR Pro v1.2 and TFT35 E3 v3.0 Sloped Top with USB hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of gamble604's sloped top for BigTreeTech's TFT35 E3 v3.0 LCD screen from…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of gamble604's sloped top for BigTreeTech's TFT35 E3 v3.0 LCD screen from https://www.thingiverse.com/thing:4678675 to add an access hole for the USB connector on the TFT35 E3 v3.0 circuit board. I aligned the hole using the model of gamble604's case from https://www.thingiverse.com/thing:4911942
I have not printed it but but include a .stl, .step, and Fusion 360 project file. I'm not sure how useful it is as there isn't much clearance so this may need additional work to improve fuctionality. The .step file was created from the original .stl file and then modified. I have not printed this as I anticipate making additional changes. Hopefully someone will find it useful though. If you try, let us know how it goes in the comments.
Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: PolyMaker PETG
Category: DIY