cupholder for yeti 20 ounce rambler, soda can, and wine glass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cupholder insert for a couch factory cupholder to hold wide containers such as a Yeti Rambler 20oz thermos…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a cupholder insert for a couch factory cupholder to hold wide containers such as a Yeti Rambler 20oz thermos without tilting. It is snug in the factory cupholder by design yet still pops in and out easily and flattens the bottom of the cupholder so larger diameter containers sit flat. A wine glass and 12 ounce soda can also works great in it. I also added an optional generic sleeve that fits tighter around the Yeti and will become the basis of other types of cupholder retrofits for a Yeti, such as for in a car.
The couch cupholder insert (yeti_rambler_20_couch_cupholder_v7) fits snugly in the factory couch cupholder yet still pops in and out of the factory cupholder easily. The drink containers fit loose inside the insert so they can be taken in and out very easily. This insert is designed for a couch but would likely hold the container too loose for use in a vehicle.
For an optional tighter fit, I added a sleeve (yeti_rambler_20_generic_v2) that fits inside the insert (yeti_rambler_20_couch_cupholder_v7) to tighten up the space around the Rambler but is still easy to take in and out. The sleeve is optional. I intend to use the sleeve without the insert as the basis for a Yeti vehicle cupholder adapter so if you are looking to retrofit a vehicle cupholder then perhaps the sleeve superglued to whatever size base that fits into your existing vehicle factory cupholder may work for you. Car cupholders are different so if you use the sleeve along with a custom base that works for some random cupholder in a vehicle or something else you have, please share it as a remix.
The couch insert took about a 2 hour and 20 minute to print at 0.28 layer height with no support. The sleeve print time is similar but could be shortened with a slightly thinner bottom.
Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
100%
Filament: eSun PLA+ PLA+ Pine Green
Category: Household