The Can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15/04-2020: Everything should be fixed now :-) !! LCD MOUNT has been fixed !! I have made a cutout in both sides, so…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
15/04-2020:
Everything should be fixed now :-)
!! LCD MOUNT has been fixed !!
I have made a cutout in both sides, so you can decide yourself what side you want the wires and I have made a blanking plate for the side you don't want the wires to come out
31/03-2020: The RaspberryPi part of the "can" has been updated to use brass fittings (M2.5) and the parts has been modified to make the walls around the plug holes a bit thicker
This design started as just the "can" for a RaspberryPI and SKR 1.3 but evolved to also contain the LCD.
It's completely modular, so if you don't want to print, the LCD stand, you print the rest. The feet are printed with threads so its easy to attach them to the "can".
They also hold the LCD stand in place.
I have yet to test print it, so use it at your own risk.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: FilamentPM PLA
Category: 3D Printing