Infinite Bed Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bed scraper will last forever thanks to its feature of being able to change his tip.
- Ocena
- 4,6 / 5
- Polubienia
- 53
- Pobrania
- 332
- Wydruki
- 8
- Wyświetlenia
- 1456
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
One of the first items I printed with my Prusa Mini was a bed scraper, now after using it for some time the tip is worn-out and I should reprint the whole scraper instead of just changing the worn-out part. For this reason I decided to design a scraper that has the possibility of change the tip once it's warn-out, plus it's quick and easy to print. Thanks to this feature you can print a scraper like new in just 15/20 min and don't waste material for a whole new one. This scraper use only 3.74 meters of filament (11.14 g) for the full scraper and only 1 meter (2.99 g) for the tip.
Print instructions
There are two difference tolerance for the joint, one is of 0.15 mm (reccomended for a strong joint) and the other is of 0.2 mm. Print the handle with the holes facing up.
settings:
- 0.2 mm layer height
- 10% infill
- enable ironing if you want a smooth surface on top
Everything else is default from Prusa Slicer.