1913 Broomstick Grips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Broomstick" style grips modeled after KAC vertical foregrip. Standard and short (stubby) models.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 884
- Wydruki
- 1
- Wyświetlenia
- 2833
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Vertical foregrips for 1913 rails modeled after the KAC VFG. No bolts needed, just align the grip body on the rail and tighten the grip screw.
Print 1 standard or stubby grip body, and 1 respective screw.
Print Orientation
The STLs are oriented in the correct position (upright for screw, face down for grip body). Orienting the grip body this way will only require supports for a single overhang.
Hardware
1" o-ring (identical to KAC VFG o-ring). May be optional, but I haven't tested if the screw would loosen any faster under use without it.
Settings
- Material: PLA+
- Nozzle: .4mm
- Layer height: .12mm
- First layer height: .2mm
- Perimeters: 5
- Infill: 100% (may not be necessary, but why risk it)
- Hotend: 225°
- Bed: 60°
- Supports: Only required for grip body, not screw. On buildplate only. Supports needed for initial overhang of 1913 interface.