Qbrick TWO Organizer Multi Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Different trays for Qbrick TWO Organizer Multi
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 259
- Wydruki
- 2
- Wyświetlenia
- 1763
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Qbrick System TWO Organizer Multi is great for bigger nails or screws but if you have lots of smaller items it may be difficult to grab them from the bottom and also a lot of space is wasted.
These trays take two spaces, fit into both upper and lower row and can be stacked.
Inner height of the Qbrick box is 58 mm and so is the height of the models. If you want to stack them on top of each other you have to cut the model to a desired height.
Two trays in a stack: 58 mm / 2 = 29 mm
Three trays in a stack: 58 mm / 3 = 19.3 mm
Four trays in a stack: 58 mm / 4 = 14.5 mm
Print settings:
Material:
PETG
Supports:
No
Resolution:
0.3 mm
Infill:
100%