Google Homeophone static back and stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a static solution for the sagging back plate problem. print these replacement parts to sturdy up the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a static solution for the sagging back plate problem. print these replacement parts to sturdy up the homeophone. It will require 4x 5mm (or sae equivalent ) screws and nuts. because of the stand design you will need varying length screws.
I designed this but have not yet printed it. I print most things in .3 mm the holes in the base will be blocked by a 1 layer sacrificial bridge.. use a screw or drill bit to clear it out of the way.
hope this makes the whole thing more sturdy.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
20
Filament: Any PLA any
Category: Replacement Parts