Fleeb for manufacturing a Plumbus (Rick and Morty)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Fleeb for rubbing on your Plumbus, because the fleeb has all the fleeb juice! Just print the front and back…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Fleeb for rubbing on your Plumbus, because the fleeb has all the fleeb juice!
Just print the front and back in light blue PLA and the arms and mouth in red PLA. and get some googly eyes (10 mm) from the dollar store or walmart or craft store or wherever.. it prints with all the holes ready to accept the pieces.
after you print the arms, you will need to break off the conical base (snaps off easy) and glue them into the arm holes.
glue everything together and have fun with your new fleeb
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
5
Filament: cheap PLA light blue, red
Notes:
this thing prints pretty quick. get some 10mm eyes and glue them into the eye holes...
Category: Toys & Games