2L Water Rocket kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of fins and nosecone to fit loosely on a 2L soda bottle that I designed for my son Harry for a school…
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 1482
- Wydruki
- 1
- Wyświetlenia
- 4041
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of fins and nosecone to fit loosely on a 2L soda bottle that I designed for my son Harry for a school project
They should fit loosely. use double stick tape to hold fins to the bottle and the nosecone should be loose to fall off and deploy the parachute
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100% this is a thin thing
Notes:
print flat side of the ring down
update
added a set of smaller fins to help print on smaller machine build plates..
also added some taller, smaller diameter fins and some downward fins
added a round and a tall pointy nosecone
Added Spinning fins
Added Rounded Spin fins
last update... kinda finished with this... added a tall multicurved nosecone
Category: Sport & Outdoors