Stardew Valley Junimo Vase for Plant Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt at making a Junimo plant pot, I was inspired by this model thing:4851143…
- Ocena
- 5 / 5
- Polubienia
- 209
- Pobrania
- 319
- Wydruki
- 6
- Wyświetlenia
- 2931
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This is my attempt at making a Junimo plant pot, I was inspired by this model thing:4851143
https://www.youtube.com/shorts/qKZXTCLtixY
But I wanted somthing with a wider base and that was easier to print as a vase in order to use Two Tone materials from 3DFilaprint link here https://shop.3dfilaprint.com/3d-filaprint-two-tone-pla-669-c.asp
Depending on how well tuned and what scale you print the model you may have to slightly resize the eyes and cheeks to get a "pop fit" or you can just glue them.
I printed mine at 30mms to get good definition on the eyes and cheeks but faster is possible
Body: 3DFilaprint Blue/Green Two Tone
Eyes: Polylite Black PLA
Legs: Polylite Black PLA
Arms: Polylite Black PLA
Cheeks: 3DFilaprint Pastel Pink PLA
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Resolution:
0.131
Infill:
0%
Filament: 3D Filaprint Blue/Green Two Tone Blue/Green Post-Printing =============
Attaching Arms, Legs, Eyes & Cheeks
The Eyes and Cheeks should just "pop fit" without any glue required but this will depend on fine you make the eyes and cheeks.
The Arms and legs are glued using super glue I recommend putting the glue for the legs on the inside of the body rather than the leg themselves.Category: Sculptures