Vive Lighthouse Picture Rail Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a way to wall mount my HTC Vive Lighthouses without drilling holes in the walls, I've included the previous…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Wanted a way to wall mount my HTC Vive Lighthouses without drilling holes in the walls,
I've included the previous version but the one i used comes in 3 Pieces of the printer screwed together and the lighthouses attach using 1/4 inch screws that can be bought of somewhere like amazon e.g. https://www.amazon.co.uk/Anwenk-Mounting-Screw-D-ring-Tripod/dp/B072L43B37/ref=sr_1_5?crid=385HKLYYCIZI&keywords=camera+screws&qid=1645016214&sprefix=camera+screws%2Caps%2C92&sr=8-5
For a full one, your going to need & final_model.stl & The_hook.stl then attached them to each other post-print.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 3
Rafts:
No
Supports:
No
Resolution:
.4
Infill:
80
Filament: 3D FilaPrint ASA X Iron Grey
Category: Video Games