1 / 13
Creality Meanwell PSU Fan Duct. This reducers noise level — zdjęcie 1
1 / 13

Creality Meanwell PSU Fan Duct. This reducers noise level

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Meanwell PSU Fan Duct. This is to replace the Noisy Meanwell PSU Fan with two blowers. This reducers noise level

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
203
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Meanwell PSU Fan Duct. This is to replace the Noisy Meanwell PSU Fan with two blowers.
 

This reducers noise level 

Replace, remove the Noisy Meanwell fan.

NOTE: Beware of High Voltage.

This involves cutting holes for 80mm fans in the PSU case.

This cuts noise levels a lot

The two 40mm x 10mm fans  are a better option I believe.

The two blower method was OK but I think the 2 x 40mm fans will be more powerful than the blowers and also be a quicker print using less filament.

The fan finger guards are a remix of :=

40mm Fan Cover by Benji_101 on Thingiverse: https://www.thingiverse.com/thing:4305874

If you use this option: Brushless DC Cooling Blower Fan Sleeve-bearing 7525S 12V 0.18A 75x33mm #HE blowers and two 80mm by 10mm deep fans

 

Tagi