Gryphon "Carbine" Barrel Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Like the idea of the Gryphon but want a longer front-end and more rail space?
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 752
- Wydruki
- 7
- Wyświetlenia
- 3818
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Seeing things like the Shidan and similar extended barrel Gryphon remixes, I liked the look of it and was inspired to create my own take on it. This one has a slightly longer barrel (it's 78mm longer) than most currently existing variations, more bottom rail space, and a more secure assembly.
Print all files necessary for a given Gryphon from the main page except for the cage components and the top picatinny rail. If you have a pre-V1.13 magwell (before the cage design change), you will have to reprint the magwell as well and swap that piece out if you still want to otherwise use a legacy cage.
Pieces will no longer necessarily fit on 120mm cubed build volume in this remix, mainly the cage. 140x140x140mm build volume should still be supported.
05/22/22: Hotfix: Added the 2-stage cages with the 2-stage Motor Cover (which I forgot to include) and screw mounts for the front of the motor cover on the barrel to bolt onto the cage).
04/22/23: Hotfix: Apparently the 1-stage Motor Cover was missing by some accounts, should be here now.