Raspberry Pi Mount for Artillery Genius Pro (and Sidewinder X2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Raspberry Pi to your Artillery printer
- Ocena
- 4,333 / 5
- Polubienia
- 49
- Pobrania
- 300
- Wydruki
- 5
- Wyświetlenia
- 2602
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This part was designed to mount your Raspberry Pi to your Artillery printer using this excellent Pi Case with siderails designed by Sneaks:
Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options
No additional hardware is required, as it mounts to the 2 M6 screws on the printer itself. I only own the Genius Pro but I'm assuming it works for the Sidewinder X2 as well.
The holes are offset to give sufficient clearance for the gantry on my Genius Pro and there's a gap between the side of the printer and the Pi for airflow and lazy cable management.
Hope this helps someone.