Ghostbuster Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lamp I designed from the excellent work of two previous designers. I recommend printing the front part in…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 730
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This is a lamp I designed from the excellent work of two previous designers. I recommend printing the front part in white so that the light will shine through. Two inside middle sections are provided, a complete one and one with a 28mmx28mm cutout in the middle. The one without the cutout allows you to cut or drill out to fit whatever you are using as a light source. The inside middle file with the cutout section was what I used to fit the light source I had (a color-changing led light).
I recommend using aluminum tape to better reflect the light. Also, you can superglue the inside middle and front on to make sure they hold. I painted the black and red parts on the front in acrylic paint and then used a sealer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
.20mm
Infill:
15% gyroid
Category: Props