1/4" UNC to M3 adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For metric places where the UNC bolts are not readily available and you need to mount something with "the camera…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
For metric places where the UNC bolts are not readily available and you need to mount something with "the camera adapter thread".
In this case it's the Intel RealSense depth camera that has that thread and when used with the adapter for aligning it and the tracking camera one needs a weird length of 1/4" UNC bolt available only in very specialized stores in Finland.
This adapter allows for using slightly shorter M3 bolt to get things together.
Fusion files at https://a360.co/2UhocjJ
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Filament: Colorfabb NGen orange
Notes:
Just set 4 perimeters (with 0.4mm nozzle) to be sure it's all perimeters.
The GCode is for MK3S + MMU2S in Single mode.How I Designed This
Just made sketch with two circles, the outer major diameter (1/4in) and inner major diameter. Then created the threads with the thread tool, remembering to check "modeled".
Category: Hobby