1 / 2
OralB Toothbrush head stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a stand for one to five OralB toothbrush heads i modelled!
- Ocena
- 4,625 / 5
- Polubienia
- 53
- Pobrania
- 485
- Wydruki
- 8
- Wyświetlenia
- 1552
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 8) (Komentarze: 11)Remiksy (1)Kolekcje (61)Powiązane
It holds the heads well so they dont tip over but also doesnt grab them too much so they are hard to take off, i printed mine in white PETG but PLA should work just as well.
Make sure you have your retraction tuned so it doesnt string when printing the upper parts! To test before printing the whole thing move it to -14,5 or -15 in your slicer depending on the strength of the bed adhesion on your printer!