FPV goggles strap buckle / connector - Orqa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a strap buckle intended to replace the poorly designed OrqaFPV goggle strap buckle which in my case broke…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a strap buckle intended to replace the poorly designed OrqaFPV goggle strap buckle which in my case broke along with other problems with these goggles.
There a five parts for each buckle:
2 x Pins Stainless Steel 2mm X 40mm - https://www.ebay.co.uk/itm/275233183423?hash=item40152d16bf:g:gW4AAOSwk75iPi9e
these are freely available and used in RC cars - Wltoys A949 A959 A969 A979
1 x T-bar - this is centre of the buckle
2 x uprights essentially these are spacers to improve the look and reduce wear on the strap
The pins pass through the t-bar and uprights adding strength.
Category: R/C Vehicles