Custom foot for Sony A72 and A73
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A foot that fits between a Manfrotto shoe and the body of a Sony A73. Adds stability and gives screen room to tilt.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 824
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
Professional wedding cinematographer here, and my company loves the Sony A73s with Manfrotto quick-release shoes. There were two problems though with attaching the shoe directly to the bottom of the camera:
- The center of gravity is too far back when a lens is attached
- The shoe can pivot left and right, since there's nothing holding it in place.
My solution is what I call a foot, since it goes on top of the shoe. My company has been using these for 4 years and have been satisfied with them, and I just did a revision this year to improve the fit and stability. Some basic hardware is needed, and can be cut to size:
- ¼-20 screw
- ¼-20 threads
- Washer
Needs only a little support, and print settings are pretty basic:
- Recommended material: ABS, though PLA works too
- Print speed: 60mm/s
- Infill: 80%