1 / 1
Circle Guide for Plunge Routers - 2 ¼ to 6 ¹⁵/₁₆ inches (57,15mm to 176,21mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a circle guide/jig for plunge routers. It can be a useful for speaker building. Based of the Jasper model 200.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (54)Powiązane
Simply mount the guide/jig on your plunge router and mark out the center on the material with a pen. Then drill a small hole in the center. Stick a pin/cylider/spike etc. in the desired diameter on the jig and place the pin in the drilled hole.
I have not printed this out yet, so let me know how it works out.
Print Settings
Printer:
Creality Ender-3 V2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12 - 0.16
Infill:
40-100%