1 / 3
Card Box 1 symetric - Easy Access for Mini American for Mansions of Madness — zdjęcie 1
1 / 3

Card Box 1 symetric - Easy Access for Mini American for Mansions of Madness

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WARNING: The lids have no tolerance gap. Upload both models to slicer of Your choice, center them and scale the lid…

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
335
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

WARNING: The lids have no tolerance gap. Upload both models to slicer of Your choice, center them and scale the lid taking into account the accuracy of your printer. (for me it was 100.2%-100.3% in CURA)

Project made in TinkerCAD. This is my 4th project added. If I should change tags or categories please let me know.

I like to give other players something to do when it's not their turn.

Therefore, most of the items that you find on my profile will be focused on the ease of access and preparation of the game, not on storage.

I just give a tray or two to one of the session participants and I say .. you will take care of this and that. Thanks to this, when another player thinks about his move, they have something to do.

In addition, most of the items you find here leave some space for more cards, markers, etc. (I don't like to print a new box after the release of each add-on & I like to keep it simple to facilitate faster future modification)

This thing:

  • You can use elastic bands to make sure the lid stays on.
  • dimensions for mini-american (41x63mm) cards in sleeves.
  • each of 2 main slots will hold 80 cards in sleeves
  • rach o 4 side slots will hols 15 cards in sleeves
  • fits Path of the Serpent expansion pack and more

Print Settings

Printer:

Monkey Fab Prime XT

Rafts:

No

Supports:

No

Resolution:

0.2

Filament: no-name PLA

Notes:

WARNING: The lids have no tolerance gap. Upload both models to slicer of Your choice, center them and scale the lid taking into account the accuracy of your printer. (for me it was 100.2%-100.3% in CURA)

Post-Printing =============

Category: Games

Tagi