LumenPnP Adjustable Staging Plate Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A staging plate foot for LumenPnP with adjustable height with screw and jam nut
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Printed using 0.2mm layers with PLA.
Print the LumenFootBody upside-down. It should not need supports.
Screw the jam nut all the way down the bolt, then insert the bolt into the body. Attach the body to the Lumen under the bottom camera/light-ring mount. Adjust the bolt to sit flush on your table, then screw the jam nut up into the body to create a tight friction fit to keep everything fixed.
Please note: this was made as a prototype with the screw threads specifically made with my printer tolerances in mind, but it should work for most printers (I think). Just be aware that if you print this, it may not work perfectly. Tested using a Prusa MINI and Ultimaker3 using 0.2mm layer height and pretty standard settings.