Bowden PTFE Coupler Clip (3 thicknesses)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy, quick printed way to help your Bowden couplers stay tight and strong. Great way to use up last meters of filament!
- Ocena
- 4,667 / 5
- Polubienia
- 65
- Pobrania
- 870
- Wydruki
- 14
- Wyświetlenia
- 2296
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Easy, quick printed way to help your Bowden couplers stay tight and strong.
Print without supports, as oriented, using your slicer's finest “super quality” setting.
Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and 1.50mm.
Dimensional accuracy on very small parts depends greatly on slicer settings, tuning, etc. With tiny parts like these, it's common for the result to be a different thickness than the design, by a small amount of variance. Even so, the result will likely work for you. Also, remember, you can always adjust thickness in your slicer by editing the Z height of the model.
These are a great way to use up the tiniest last meters of filament! One of these clips takes only 0.02-0.03 meters to print, depending on which thickness, and printing a set of 12 takes only 0.2-0.28 meters to print, depending on which thickness.
My PayPal tip jar: https://paypal.me/design8studio
Various LowRider 3 CNC remixes:
View all my models and remixes on Printables:
*Amazon product links are affiliate links.