1 / 8
Coin holder for Scythe (cardboard, non metal coins) — zdjęcie 1
1 / 8

Coin holder for Scythe (cardboard, non metal coins)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Coin holder for the game Scythe. This is sized for the chitboard coins that come with the game, not the metal coins…

Ocena
0 / 5
Polubienia
5
Pobrania
22
Wydruki
0
Wyświetlenia
401
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

Coin holder for the game Scythe. This is sized for the chitboard coins that come with the game, not the metal coins that are in the kickstarter or will soon (maybe already) be sold separately. These MAY work for the metal coins if they are thin enough, I think the diameters of them are the same.

This box is made for some small rectangular magnets I had lying around, I love magnetic clasps for boxes. The magnet dimensions used are: 9.7mm x 5mm x 0.8mm

The two files with 'full' in the name are the entire box. I am on a lulzbot mini so could not quite fit it in one piece so I printed the four 'split' versions instead. The seam is meant to be partly hidden by the the decorative raised parts of the box. I printed in ABS and used acetone to weld them together and acetone slurry to fill in any small gaps.

Sorry for the wonky orientation, by default fusion 360 works in y up orientation so everything is 90 degrees off, should be easy enough in most slicers to rotate them. I have fixed my 360 preferences, but that will on effect future projects I start.

Category: Games

Tagi