Spacemouse protective case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used to take my spacemouse with me to school. So ich designed this protevtive case to protect the Spacemouse during…
- Ocena
- 4,5 / 5
- Polubienia
- 11
- Pobrania
- 51
- Wydruki
- 2
- Wyświetlenia
- 509
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used to take my spacemouse with me to school.
So ich designed this protevtive case to protect the Spacemouse during transport.
The 3 Axis of the Spacemouse are completle free in the case so the do not bump into the case during transport, so the case is clamping the bottom part of the Spacemouse without touching the knobs on the side.
The usb pin fits into the top of the case so you dont forgett it.
You can Print this thing without Support!
I hope you like my design
For more follow on Instagramm or leave a like:)
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
25%
Filament: Polymaker Polyflex PLA Black
Category: Engineering