Prusa MK3 Dual Arm Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual arm spool holder for Prusa MK3.
- Ocena
- 2 / 5
- Polubienia
- 12
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Didn't like a lot of the single arm spool holders as they all seem to lean a little so the spool moves to one end, also wanted it to have a roller as I use a lot more cardboard spools now and they seem to wear down and leave cardboard dust on the static ones.
I have attached a picture of the roller to show the orientation when printing and will need supporting from the build plate only like in the picture.
If you are using PrusaSlicer under the Infill tab set the “Solid infill threshold area” to anything above 40 and it will set the 2 ends of the roller to use solid infill 👍🏻
You can either download the single arm and copy and paste it or download the duel which is in the correct orientation so that the shiny top sides are facing outwards.
Thanks and any problems let me know.