ASG Shadow 2 Clip Magazine Follower Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I decided to make a thing that would make my hobby a bit easier on my fingers. It's a magazine follower holder that…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
So I decided to make a thing that would make my hobby a bit easier on my fingers. It's a magazine follower holder that helps you when you're reloading BBs.
It's still possible to use a BB loader (at least the one that I have).
It's a very simple design, worked on first try so I didn't bother changing a single thing :)
I used 2 small screws (M2,6 x 10 mm) for joining both parts as printing them in one piece would result in too many supports.
How this works?
Just put the magazine inside the holder, pull down the follower with something (screwdriver, stick, ...) and it'll lock in place. When you're done refilling BBs you can simply release the holder and take the magazine out.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0,3 mm
Infill:
100%
Filament: Prusament PETG Transparent
Notes:
You can print the holder base normally facing down but print the holder itself on side for extra strength.
Category: Other