Logitech C270 Camera Mount for U.S. 1/2" EMT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Was looking for a good C270 mount for my Piper 2 U.S. 1/2" EMT printer. Found luc_e table top mount and thought it was…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Was looking for a good C270 mount for my Piper 2 U.S. 1/2" EMT printer. Found luc_e table top mount and thought it was awesome: https://www.thingiverse.com/thing:1228521.
I wanted something that attached directly to the gantry or frame, so I designed thehalf-in_emt_camera_mount andhalf-in_emt_mount2 to interface with parts designed by luc_e.
The minimum files are included in this thing with additional features by luc_e that can be obtained form the link above. Print as many tripod_arms as you need. I used two.
The two "mount" pieces use #6-32 x 1/2" or 3/4" screws to fasten to the EMT tube and luc_e parts use M3x20mm SHCS and nuts.
13apr2019 - Added tripod_arm_90mm and tripod_arm_rotated .stl files for more mounting options.
Remember, if you make one, please post a make.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
Yes
Resolution:
0.2 to 0.3mm
Infill:
25% to 35%
Filament:
Zyltech PLA
Gloss Black
Category: 3D Printer Accessories