Vive DAS to Pimax Adapter - Tighter fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After printing the most excellent "Pimax + Vive DAS Adapter" by Drcube, I had trouble getting a tight enough fit for…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 287
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After printing the most excellent "Pimax + Vive DAS Adapter" by Drcube, I had trouble getting a tight enough fit for more vigorous games. This part simply takes the "DAS_Adapter_Short_Sideways_Printable_A" part and moves the pimax attachment point in, to give about an extra inch of tightenting room.
I printed mine from PLA at 0.3mm layer height and have had no problems.
You will still need the rest of the parts from Drcube's adapter
Drcube did all the hard work, I just moved a hinge.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
30%
Filament: Inland PLA Blue
Category: Other