Endoscope Mount for Petsfang Blokhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed an endoscope mount to mount something to the front of the Blokhead fan duct from Petsfang.
- Ocena
- 4 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I needed to mount an endoscope (9.9mm diameter, purchased years ago here: https://www.amazon.com/gp/product/B00JERRES6/ref=ppx_yo_dt_b_search_asin_title ) to the Blokhead fan duct system from Petsfang. Designed in Fusion360, it holds the cable in between the duct and the parts cooling fan. For my needs this works well, though after a time of fast printing the endoscope can twist in the mount, giving you a crooked viewing angle.
I will adjust the tolerances so it holds better.
Printed in Polymaker PETG, 0.3 layer height, 0.6mm nozzle, 15% infill. I used snug supports and printed it front down, and the support popped off with a fingernail.
Sliced in SuperSlicer 2.4.
Update 6.17.22 V3: Added more material around endoscope to hold it better. Also printed in ABS as the PETG was soft.