Proxxon Micromot Drill Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drill press designed to fit the Proxxon Micromot 60E/F.
- Ocena
- 5 / 5
- Polubienia
- 164
- Pobrania
- 493
- Wydruki
- 1
- Wyświetlenia
- 5206
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an older project I have finally got round to uploading! A drill press stand designed to fit the Proxxon Micromot 60E/F. It also gave me a chance to try out my laser cutter at the time. Unfortunately there isn't much in the way of instructions, but hopefully the labelled views are self explanatory. I have also included the svg files that you can use to cut out the plywood base.
If you have any questions let me know!
3DB.CREATION
ALTERNATIVES
If you don't have access to a laser cutter or want to have simple build, use the STL file: base_printed. This replaces the lower part of the project with a solid printed part
EXTRA PARTS
---------------------
You will need a few extra bits and bobs to complete this project. I will include a link to some example parts from amazon:
- 2 X Extension Springs OD 5.5mm x 35mm (you could also use a piece of bungie chord looping around inside the part)
- 2 X M4 washers
- 5 X M4 HexHead Bolt 16mm
- 5 X M4 Countersunk Bolt 12mm
- 5 X M4 Countersunk Bolt 16mm
- 2 X M4 Countersunk Bolt 20mm
- 15 X M4 Threaded Insert
- 5 X 30mm Foam Pads
- About 400mm of tubing OD 20mm