Shogun Chassis for King Axles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a complete chassis for Drommon's King Axles. It is centered around the use of a Wheely King transmission and…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This a complete chassis for Drommon's King Axles. It is centered around the use of a Wheely King transmission and shock towers (what I had on hand, fairly easy to find). Printed in PLA at 100% infill and 0.2 layers. Uses RC4wd M3/M4 rod ends and 20mm M4 set screws for the links.The cage is optional and gets in the way of battery installation but looks good. It is designed to use shorty lipos (again, what I have on hand). The center driveshafts are from a 3.3 T-Maxx. The one piece chassis plates require a 300x300 bed to print (CR-10). If anyone has an RC4WD SCS transmission and feels like modelling it I will update this chassis to incorporate that as well.
Category: 3D Printing