HPI Wheely/Crawler King chassis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a chassis for the Wheely/Crawler King from HPI. Designed to use the longer wheelbase links from the Crawler King…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Made a chassis for the Wheely/Crawler King from HPI. Designed to use the longer wheelbase links from the Crawler King along with Traxxas Stampede sized bodies. You will need servo on axle steering as this doesn't accommodate the factory style steering linkages. I prefer the hot racing kit. I included a beefier steering link to work with the Hot Racing kit but will work with others. Print at 100% infill. This needs a minimum 300mm print bed to be printed as intended. It will not fit on an Ender 3 unfortunately.
Category: 3D Printing