1 / 24
Stargate Zero Point Module (ZPM)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the design to print the main body as 1 piece so that no line would be visible when illuminated. I designed a…
- Ocena
- 5 / 5
- Polubienia
- 216
- Pobrania
- 1108
- Wydruki
- 11
- Wyświetlenia
- 7657
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 11) (Komentarze: 25)Remiksy (1)Kolekcje (288)Powiązane
- I remixed the design to print the main body as 1 piece so that no line would be visible when illuminated.
- I designed a hidden switch into the base to turn it on and off. (the center red crystal)
- I added an interior mount for the lights. (the light bar has room in the middle for a battery pack)
- I added a display base design.
I mounted my ZPM to the base and hard wired it so that I wouldn't have to change batteries and I don't really plan on moving it around much. I made it to go on my prop shelf.
Supplies I Used:
- 3D Solutech See Through Orange PLA (https://www.amazon.com/gp/product/B00MB2TW86)
- Translucent Red PLA (only needed for center crystal OR you can paint it)
- Metallic Acrylic Paint - Crimson (https://www.amazon.com/gp/product/B001GJLJB8)
- Metallic Acrylic Paint - Pearlescent Emerald (https://www.amazon.com/gp/product/B004BP1KFY)
- Ustellar Dimmable 600 LED Light Strip Daylight White (https://www.amazon.com/gp/product/B074N4YVDK)
- Latching Type Push Button Switch (https://www.amazon.com/gp/product/B06XF6PT9L)
- Spring (I used the spring out of an old TP roll holder and cut it in half similar to - https://www.amazon.com/Danco-88648-Toilet-Paper-Holder/dp/B00JJXMAI4)
Switch DEMO: https://youtu.be/O9XEQs2jyn4
Category: 3D Printing