1 / 3
Wall Bracket for 18mm Ply
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screws to the wall side of 18mm ply so you can mount it flush.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
I created this so I could build some filament storage racks out of ply and dowel but didn't want to mess around with difficult wall hanging. Screw it to the wall side of the ply and then it screws straight to the wall.