Finned planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by similar design I made this in 3D studio max using a shape and the loft modifier as it allows detailed…
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 501
- Wydruki
- 3
- Wyświetlenia
- 2569
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Inspired by similar design I made this in 3D studio max using a shape and the loft modifier as it allows detailed control over scaling, rotating etc.
I made this to test printing with larger nozzles and have successfully printed it in 100 and 120% with a 0,60 nozzle and and 0,3 mm layer height and 70% with 0,40mm
Print with 4-6 bottom layers, 2-3 outline, no infill, no top layers.
complete water tightness is a bit hit n miss depending on your print settings. So to be sure I painted the PLA planters on the inside and for the ABS swished a bit of acetone around to create a sealed surface.
2018 July 17 - made some variations with more and finer fins optimized for 0.40 mm nozzle https://www.thingiverse.com/thing:3009293 https://www.thingiverse.com/thing:3009294 https://www.thingiverse.com/thing:3009295 https://www.thingiverse.com/thing:3009296 https://www.thingiverse.com/thing:3009297
2018 July 24
Made some more designs
fluted vase 40 cm high https://www.thingiverse.com/thing:3018290
fluted planters https://www.thingiverse.com/thing:3018316 https://www.thingiverse.com/thing:3018321
2018 August 7
Prototype concrete mold for fluted planter https://www.thingiverse.com/thing:3039055
Category: Decor