1 / 3
Anycubic Chiron Filament Sensor Holder and Filament Guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I installed a BMG extruder on my Chiron. Also, due to space limitations, I had to place the filament spool on top, so…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 922
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (29)Powiązane
I installed a BMG extruder on my Chiron. Also, due to space limitations, I had to place the filament spool on top, so I wanted an additional filament guide and at the same time a straight filament run.
So I combined these two great ideas into one.
The holder is equipped with an M6 thread for a pneumatic coupling
Category: 3D Printer Parts