Vallejo Paint Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(Somewhat) stackable paint storage for Vallejo and other similarly sized paint bottles
- Ocena
- 4,789 / 5
- Polubienia
- 491
- Pobrania
- 4009
- Wydruki
- 18
- Wyświetlenia
- 23 222
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I wasn't satisfied with other existing paint storage designs - either they took too long to print, or seemed more appropriate for laser cutting. I designed my own with a goal of making it simple and quick to print.
Fits Vallejo 17ml bottles and similar (Army Painter, misc 15ml bottles, etc..)
Either print a single rack and one brace, or two racks and a tall brace. Attach together with hot glue.
Designed for a 0.6mm nozzle and large layer heights (0.3mm or 0.35)
Save time by not printing the bottom layers solid. I used a modifier in PrusaSlicer to set the bottom 3mm to 0 top and bottom layers and 20% gyroid infill.
Print the brace with vase mode & 5+ bottom layers