Puch SRA foot brake lever limit stop Fußbremse Bremsanschlag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for a broken limit stop for a Puch SRA (and SR, maybe others?) foot brake lever.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The limit stop is best printed in TPU on the side, which does not require any supports.
It prints in one piece, the two pieces that fit into the lever to hold it in place can just be slid in. Depending on your printers tolerances you may need to cut the narrow cutout through, if it melted together.
Der Bremsanschlag wird am besten in TPU seitlich liegend gedruckt und braucht dann kein Stützmaterial.
Es ist ein Stück, die beiden Fortsätze, die in den Bremshebel hineingehen, können einfach in den Hebel geschoben werden und halten von selbst. Je nach Toleranzen des Druckers muss vielleicht die Engstelle durchgeschnitten werden, falls sie verschmolzen ist.